By 2020, experts project that 50 billion connected devices will be in use globally. The Internet of Things (IoT), smart homes, connected cars, fitness monitors and other emerging technologies are increasingly relying on global wireless networks to connect.

Advanced Materials in 5G and the IoT

Fifth Generation (5G) networks demand greater material performance to support these IoT devices. Rogers’ diverse portfolio of high frequency, high performance materials enable these complex 5G technologies that create our mobile networks, including antennas, backhaul radios and power amplifiers. And our R&D teams are collaborating every day with design engineers to develop additional unique material solutions for 5G technology.

5G is pushing the limit of Printed Circuit Board (PCB) designs including antennas, control functions and amplifier circuits. PCB attributes such as copper surface roughness, Dk variations, thermal dissipation, passive intermodulation, coefficient of thermal expansion and thickness variations affect 5G designs more than previous generations.

5G: Higher Frequencies

Next-gen 5G wireless networks promise more capacity and capability than 4G LTE systems, using wider channel bandwidths, new antenna and modulation technologies and higher carrier frequencies even through millimeter wave frequencies.

The transition to 5G will require the widespread use of higher, millimeter-wave frequency of 28 GHz and above. Evolving 5G infrastructure will depend on low-loss circuit materials engineered for these high frequencies.

Our new RO4835T laminates and RO4450T bonding materials are well suited for millimeter-wave frequencies as part of the inner core of 5G hybrid multilayer PCBs. They work well with other materials to provide the many functions needed by 5G wireless base stations, including power, signal control and signal transfers.

5G Resources for Design Engineers

Meeting the demands of evolving 5G infrastructure, engineers need to address the right balance of material performance and cost.

5G and Connectivity

For engineers and manufacturers, we created online educational resources about material considerations for 5G designs. You can access technical information and helpful videos on our 5G resources page.

“The Road to 5G” Video Series

Our Road to 5G videos offer quick and easy ways to learn how to specify PCB materials for 5G to get ready for this next revolution in wireless communications.

Other Resources

Stay connected with our team and learn more about 5G technology by subscribing to our Tech Support Hub.

From talking refrigerators to implanted heart monitors to trains that report seat availability, sensors are a vital part of the Internet of Things (IoT). In fact, you could make a good argument for calling it the “Internet of Sensors.” Most IoT devices include a sensor array, a microcontroller (MCU), Bluetooth or WiFi radio, and power management. Some devices also have a display or push-button inputs.

IoT_graphicIoT devices are focused on physical interfaces that use sensors and actuators, as opposed to the human interfaces of most computing platforms. IoT devices receive input through sensors that are typically miniaturized through MEMS technology. They send out information through wired or wireless interfaces to mobile devices and cloud-based servers. Sensor types include pressure, chemical, strain, and temperature, each with varying measurement frequencies and triggers. Communication connectivity involves varying intervals, distances, data rates, packet sizes, etc.

Most industrial devices are now smart, connected products with built-in sensing, processing, and communications capabilities. Much of the equipment that is remotely located includes embedded sensors that identify equipment problems and report them back to manufacturers through cloud software over the Internet, thus making them IoT devices. Sensors generate data, data produces knowledge, and knowledge drives action. Therefore, making sense of the data that those devices generate creates productivity improvements through equipment maintenance, inventory optimization, energy savings, and labor efficiencies.

According to ABI Research, the increasing adoption of IoT within industrial settings will result in a substantial growth of the number of connected devices, in particular control devices like programmable controllers (PLCs). It is expected that the number of connected industrial controllers will triple by 2020. This will produce an enormous strain on the existing infrastructure, both wired and wireless.

IoT Constraints: Power and Miniaturization

Regardless of the application, IoT devices are often located without easy access to power. This makes low power consumption one of the most universal constraints across the IoT space. IoT devices also require long lifetimes, further constraining power consumption. Bigger systems can afford µW – mW average powers, but millimeter-size devices need to make do with nW powers.

According to a team of researchers at the University of Michigan, “In low duty cycle systems, the sensor will be mostly inactive, reducing active power consumption and making standby power the dominant component. On the other hand, systems with high bandwidth requirements will have significantly higher power budgets with the radio as the dominant factor.”


Figure 1: IoT Sensor Properties and Power Constraints.

IoT device packaging requirements typically include miniaturization in the form of low-cost, good power dissipation (low power for the silicon portion), good RF shielding, and support for multiple RF standards, such as WiFi, ZigBee, or BTLE (Bluetooth low energy, aka Bluetooth Smart). As discussed in EDN, “Cavity-based solutions are popular when sensors are involved, especially when there are stimulus delivery requirements such as port holes in microphones. IoT packages must also be production ready, since waiting for a new custom package is often not an option due to time-to-market constraints. Finally, regardless of whether the solution is discrete or integrated, the footprint must be small.”


Figure 2. Common MEMS packages and die fabrication techniques that could be adopted for IoT devices.

IoT Constraints: Bandwidth

The IoT is also constrained by the Internet’s available bandwidth. The demand for WiFi and the transmission of mass quantities of mobile data is predicted to grow exponentially. By 2019, more than ten billion mobile devices will exchange 35 quintillion bytes of information each month. Add to that the countless desktop computers and computer-based equipment located in households, schools, government facilities, and throughout industry.

McKinsey reports that the IoT has a total potential economic impact of $3.9 trillion to $11.1 trillion a year by 2025. At the top end, that level of value—including the consumer surplus—would be equivalent to about 11 percent of the world economy.

IoT_economic_impactTo achieve this kind of impact, companies need to work with each other and with government agencies to overcome technical, organizational, and regulatory hurdles.

Let’s start with the glut of IoT data, much of which is not used:

  • On an oil rig with 30,000 sensors, only 1 percent of the data is examined. That’s because this information is used mostly to detect and control anomalies—not for optimization and prediction, which provide the greater value.
  • A fleet of 100 modern rail cars produces between 100 to 200 billion data points annually. Siemens is working with railways to create data teams to monitor the data that a train sends out, including information about what parts of the train have broken, what spare parts have been used, what spare parts are still available, what geographic regions it has traveled through (is there a hill that is notorious for causing problems?), and whether it’s near a service depot that has capacity to provide maintenance.
  • According to Deloitte, the primary challenge in chronic care is linking the devices so they can communicate reliably and securely. While in-home blood-glucose and heart-rate sensors, for instance, are widely available, they are rarely set up to export their data to a system that aggregates and shares information with all involved parties.

To handle the data, a network is needed that balances conflicting requirements, such as IoT device range, battery life, bandwidth, density, endpoint cost, and operational cost.

According to Gartner:

Low-power, short-range networks will dominate wireless IoT connectivity through 2025, far outnumbering connections using wide-area IoT networks. However, trade-offs mean that in many cases, network types will coexist.

For IoT applications that need wide-area coverage combined with relatively low bandwidth, good battery life, low hardware and operating costs, and high connection density, cellular networks don’t deliver. Wide-area IoT networks need to to deliver data rates from hundreds of bits per second (bps) to tens of kilobits per second (kbps) with nationwide coverage, a battery life of up to 10 years, an endpoint hardware cost of around $5, and support for hundreds of thousands of devices connected to a base station.

The first low-power wide-area networks (LPWANs) were based on proprietary technologies, but in the long term emerging standards such as Narrowband IoT (NB-IoT) will likely dominate this space.

Industrial IoT applications present an additional challenge in that they often require high data rates in order to transmit and analyze data in real time. Systems creating tens of thousands of events per second are common, and millions of events per second can occur in some telecom and telemetry situations. To address such requirements, distributed stream computing platforms (DSCPs) have emerged.

Other new technologies are being created to help the IoT become a self-sustaining network of sensors and devices that deliver valuable insight obtained from massive amounts of data:

  • Laminated multilayer busbars provide efficient and compact connections for propulsion, auxiliary, and other IGBT based converters in connected car and connected rail systems.
Tagged with:  

Global trends are driving the need for radical innovation. One of the areas we see this occurring is in developments related to the “Internet of Things.” More and more objects are being embedded with sensors that allow them to communicate over wired and wireless networks.

According to McKinsey & Co:

When objects can both sense the environment and communicate, they become tools for understanding complexity and responding to it swiftly. What’s revolutionary in all this is that these physical information systems are now beginning to be deployed, and some of them even work largely without human intervention. The resulting information networks promise to create new business models, improve business processes, and reduce costs and risks.

These networks are making their presence known in the home, in cars, even in conservative industries like farming.

John Deere, for instance, is using connected technologies to respond to the growing demand for food, greater markets volatility, growth in farm size and specialization, need for environmental sustainability, reduced skilled labor, and the emergence of precision agriculture. Machine optimization, which helps machines improve their capacity and productivity, will soon include such functions as GPS and assisted steering. A “connected” tractor will reduce passes through the field, improving overall fuel economy and increasing comfort for the operator. Remote access to assets will ensure farm machines are running optimally and are maintained before they break down. Farmers can also use improved logistics to manage growing fleets of tractors and larger operations. This all has a significant impact on the bottom line.

Ericsson takes a broader view of our connected world in its new blog, The Networked Society:

We are on the brink of an extraordinary revolution that will change our world forever. In this new world everyone, everything and everywhere will be connected in real time. We envision that by 2020, there will be more than 50 billion connected devices. We call this the Networked Society, and it will fundamentally change the way we innovate, collaborate, produce, govern and achieve sustainability.

From farms to urban areas, networks are driving much of our activity.

The explosive growth of cities and the rapid uptake of broadband are both happening at a time when the world faces serious economic, environmental and social challenges. Ensuring that our cities are creative, connected, and sustainable is a major challenge but also a tremendous opportunity. By transforming our cities, we can improve the lives of billions of people along with the health and future of the planet itself.

Preventing thermal and voltage fluctuations is critical for these high performance servers and data storage systems that rely on GHz speed CPUs, interleaved cache memory, and multilayer motherboards. These systems must balance demanding performance parameters, including signal integrity, dielectric constant (Dk), dissipation factor (Df), and thermal conductivity.

Rogers’ high frequency laminates are designed for wired and wireless communication networks. They have good dielectric characteristics suitable for high frequency signals, and provide superior heat resistance for high layer count boards.